Hi Everyone
I have FTTH 1Gbps. After attending webinars I got MX64 , MS120-8 and MR33.
My topology is FTTH(Huawei) > Synology RT2600ac > MS120-8 > MR33
The problem I have is that MR33 slows down a connection speed.
I get 530Mbps on my old iPhone7 when am connected directly to RT2600ac.
But when am connected to MR33 then am getting 130Mbps top.
Speedtest I did in same place with same distance to MR33 and RT2600ac and nothing blocked the radio.
I had to remove MX64 from my network as it was capping my FTTH speed to 250Mbps.
Can you please advise me what to do to get higher speed results while connected to MR33?
thanx