Meraki

csm31458 · ‎Oct 15 2020

the problem was that I set my wifi on channel 140 which dont support 80/160 mhz width. once I moved on channel 100 then I got over 400mbps speed on my iPhone7 however I noticed another issue , in spite of UNII-3 has been signed in my country , Meraki still dont let me use that channels 😞 but thats a different story

csm31458 · ‎Sep 17 2020

I did a test , to my RT2600ac I connected old Cisco AP AIR-SAP1602I-x-K9. The Speedtest result was 180mbps download. So yeah , there is a difference.

csm31458 · ‎Sep 14 2020

hi @KarstenI , I forgot to add that MR33 already was on 80mhz , and yes indeed RT2600ac was on 80+80mhz but after amending channel width on RT2600ac to 80mhz I've got same results 😞 btw I see maybe 2-3 wifi 5ghz networks so yes , I live on lonely island

csm31458 · ‎Sep 14 2020

Hi Everyone I have FTTH 1Gbps. After attending webinars I got MX64 , MS120-8 and MR33. My topology is FTTH(Huawei) > Synology RT2600ac > MS120-8 > MR33 The problem I have is that MR33 slows down a connection speed. I get 530Mbps on my old iPhone7 when am connected directly to RT2600ac. But when am connected to MR33 then am getting 130Mbps top. Speedtest I did in same place with same distance to MR33 and RT2600ac and nothing blocked the radio. I had to remove MX64 from my network as it was capping my FTTH speed to 250Mbps. Can you please advise me what to do to get higher speed results while connected to MR33? thanx

Meraki

Community

About csm31458

csm31458

Community Record

Re: MR33 slows down a connection speed

Re: MR33 slows down a connection speed

Re: MR33 slows down a connection speed

MR33 slows down a connection speed

Re: MR33 slows down a connection speed

Re: MR33 slows down a connection speed