MAC Authentication - how to dynamically control Bandwidth rate per client?

[Alexs20]

Hi,

I there any way to control Bandwidth rate dynamically using RADIUS response in  "MAC-based access control" mode?

I know how to do that via polices, but i need to control it dynamically, per authentication, something similar to that:

WISPr-Bandwidth-Max-Up := 100000
WISPr-Bandwidth-Max-Down := 100000

Thanks.

[alemabrahao]

Unfortunately not.

https://documentation.meraki.com/MR/Encryption_and_Authentication/Configuring_RADIUS_Authentication_...

[GreenMan]

I would look at assigning Meraki Group Policies using RADIUS attributes:  https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Creating_and_Applying...

and configure Traffic shaping within the policy

[Alexs20]

yeah, looks like this is the only way

[PhilipDAth]

Yes.  The attributes to use are:
Maximum-Data-Rate-Upstream

Maximum-Data-Rate-Downstream

You can find all the attributes allowed in this document.

https://meraki.cisco.com/lib/pdf/meraki_whitepaper_captive_portal.pdf 

[Alexs20]

unfortunate it doesn't work with either "MAC-based access control" nor "Identity PSK with RADIUS"

looks like this is only for Sign-on Splash

just tested

[PhilipDAth]

Bummer!  Then your only choice is group policies.