Latency Issue on MR36

M_I_D
New here

Latency Issue on MR36

Hello,

 

We have MR36 in our office.

We currently have latency issue everyday, rebooting the AP solve it for short period of time.
Workstations on LAN have no issue.

 

Anyone have a working solution for same.

 

Thanks

3 Replies 3
KarstenI
Kind of a big deal
Kind of a big deal

Are you using an up to date firmware?

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
RWelch
A model citizen

I would think your workstations would be access ports (experiencing NO issues) while MRs are typically on trunk ports (with latency issues).  What does your uplink port config look like for the APs?

BlakeRichardson
Kind of a big deal
Kind of a big deal

If you ping another device connected to the AP what are the response times like?

 

Client to client pings over wifi with a good install should work well so if you are getting horrible ping times there is most likely an issue with your installation. 

 

Did you do a site survey before installing the access points?

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels