IP Address

rodeddie
Here to help

IP Address

Hi, I presently installed a Catalyst AP, and IP address stays as 10.10.1.1 (via DHCP) it only registers to the cloud if the VLAN is changed on the switch port, another AP was set with the same configuration but on another network and it comes up with IP address 192.168.10.10 and it registered fine. SSID is set in Bridge.

 

Regards

3 Replies 3
DarrenOC
Kind of a big deal
Kind of a big deal

Hi @rodeddie , what is the Management network for the APs?  Is the switchport it’s connected to a Trunk with the Native VLAN configured as the management vlan?

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.

Darren,

 

Regarding the Management Network can you indicate what info you need, and as for the switch port it's a trunk on VLAN 125.

PhilipDAth
Kind of a big deal
Kind of a big deal

Does your firewall show any traffic being blocked from the AP?

 

Is DHCP running on the native VLAN of the switch port?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels