How to clear an Alert

[EricDrewe]

I have the following alert

"Ethernet uplink speed degraded.

The data rate from Meraki 1 / 15 is capped at 100 Mbps and operating at full duplex"

Due to the local cabling this AP will never run at 1000mps.

I have set the switch port to 100 meh Auto, yet the alert is still there.

[Mloraditch]

You can acknowledge the alert in the Assurance, Alerts page on your dashboard. This should suppress it.

[EricDrewe]

Thank you very much, this is what I was looking for.