Connection lost

JuniorNetEngin
Comes here often

Connection lost

I'm connected to the Wifi with my laptop and I sit not further than 5 meters of AP02. I'm in meeting and I lose the connection every 5 - 10 minutes, the call is set on hold and lost. I couldn't do the meeting on the Wifi so I had to use my 4G hotspot to keep a stable connection.
Later on and after my meeting I did a test teams call with a colleague and we also had the problem.

This problem happens since the laptop migration, with BE laptop and EA-Wifi ssid there was not any problem.

The problem seems to be linked with the new EA ssid and laptops from group environment.

 

How to troubleshoot in Meraki? I have the Mac address of the laptop.

2 Replies 2
alemabrahao
Kind of a big deal
Kind of a big deal

This problem may be occurring for several reasons, such as a poorly planned network design, roaming issues due to client load balancing, Wi-Fi network card driver issues, etc.

Ideally, a site survey should be conducted, but here is a document that can guide you.

 

https://documentation.meraki.com/Wireless/Troubleshooting_and_Support/Troubleshooting/Wireless_Issue...

 

I also suggest you open a support case.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
PhilipDAth
Kind of a big deal
Kind of a big deal

If you visit the below URL - are you attached to that AP?
http://my.meraki.com/

 

Check out "Wireless Health":

https://documentation.meraki.com/Platform_Management/Dashboard_Administration/Operate_and_Maintain/M...

 

Also, click the client in the dashboard and review the roaming events.  Is the client making any bad decisions?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco ID. If you don't yet have a Cisco ID, you can sign up.