C4W configuration

[MarkSielte]

Hi everyone,
I ask your support for a problem that sad me.
I have configured the MR70 parameters as written in the Meraki documentation but the splash page doesn't appear.
I have already put the C4W server IP in the walled garden and inserted the external splash pahe URL but the situation doesn't change.
Anyone know how to help me?
Thanks

[TBHPTL]

Ok, it sounds like you are wanting to configure your AP for a 3rd party RADIUS provider. I have never heard of C4W but should be the same.

There are two spots to that you have to do this:

1. Wireless-->Configure--> Access control this is where you establish your RADIUS credentials /Walled Garden etc. on a per SSID basis.If you have done thi properly you will see an OK for your RADIUS server

     2. Wireless-->Configure-->Splash Page. Again, set on a per SSID basis.

[PhilipDAth]

Could you post a web link to the product you are using?

[Phantom-x · Accepted solution]

Hello Mark

First Step :

be sure that your VLAN Guest is propagated proprely on all interco ports + AP ports (if any)

Second step :

Create your Guest SSID

Association requirements: Open

Splash page Sign-on with : My RADIUS Server

RADIUS for splash page : Put C4W Radius Servers (1812 Port Auth and 1813 for Accounting)

configure walled garden

Addressing and traffic : Bridge mode + TAG the vlan ID (if any)

then

go to Wireless => Splash Page :

Custom Splash URL : Or provide a URL where users will be redirected : put your C4W Splashportal URL

Splash Behavior A different URL : put your C4W Splashportal URL