Apple device dosent show the splash page

athan1234
Building a reputation

Apple device dosent show the splash page

Hello

 

The apple devices dosent show the captive portal .

8 Replies 8
jakubt
Meraki Employee
Meraki Employee

On the device itself attempt to access http website that should trigger the redirect to the captive portal. 
If still does not work you will need to check with captures whether

  • client device is sending the GET request
  • AP is re-directing to the right splash
  • client is following the re-direct
alemabrahao
Kind of a big deal
Kind of a big deal

Force Open a Captive Portal on Mac, iPhone, iPad. The simplest way to forcibly reopen a captive portal wi-fi login page is to go to the following URL in Safari on your device: Go to http://captive.apple.com/hotspot-detect.html in Safari. This should immediately find the captive portal and force it to open.

 

Try allowing the URL captive.apple.com on the Walled garden.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
athan1234
Building a reputation

Hi

 

 

I attach the configuratión , the guest user try to connect trought iphone  have the problem

 

athan1234_0-1683209802885.png

 

athan1234_1-1683209845429.png

 

 

You are allowing non-http traffic, you need to configure it to block and allow only what is needed in the walled garden.

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
athan1234
Building a reputation

Do you thinkthe problem could be possible the custom page is https and the Iphones blocking  the conexion Https without certificate ?

 

I tasted  block  and allow  the same problem

athan1234_0-1683210952010.png

 

 

I can't say that the Iphone is blocking, but a custom page without a valid certificate could be the problem.
 
Did you test it with the page that Meraki provides, not the custom one?
I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
athan1234
Building a reputation

Hi

 

No I did not the test with the meraki provides , I will do

athan1234
Building a reputation

I performed the test, and the Apple device displayed the splash page with the Meraki splash page. I tried something out, and it seems to work. After the splash page, I added the URL, and it seemed to be working.

 

I belive it  dosent the best solution but it seems works fine

 

athan1234_0-1683272954359.png

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels