APPLE TV broadcast via Wifi,not via Cable

MauroF
Building a reputation

APPLE TV broadcast via Wifi,not via Cable

Hi, I have an issue.

My VLAN 24 (Wi-Fi VLAN) has an Apple TV device. I'd like the Apple TV to be advertised only within the same network.

Currently, even though Bonjour is disabled below the SSID, I can still see the Apple TV from other VLANs(vlan 50).

The strange part is that if I get an IP in the same VLAN (vlan 50) via cable, I cannot see the Apple TV (which is the expected behavior).

 

Just to summarize:

-  If I connect via Wi-Fi in VLAN 50 (for reference), I can see the Apple TV.

- The same VLAN, but wired, I cannot see the Apple TV.

Any ideas?

 

#AppleTV

5 Replies 5
alemabrahao
Kind of a big deal

Why don't you just block communication between the two VLANs?

 

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
MauroF
Building a reputation

They need to talk each other

alemabrahao
Kind of a big deal

Take a look at this: https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/Wireless_Client_Isolation

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
MauroF
Building a reputation

Isolation is just withing the network.

BlakeRichardson
Kind of a big deal
Kind of a big deal

How is the AppleTV connected? Wifi or ethernet.

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.