9100 Series

Solved
Mayhhem
Conversationalist

9100 Series

Hello,

 

Does Meraki Dashboard migration support the 9100 Series (9120AXI-E and 9115AXI-E)?

 

1 Accepted Solution
RaphaelL
Kind of a big deal
Kind of a big deal

Hi ,

 

Yes according to this document : https://documentation.meraki.com/Cloud_Monitoring_for_Catalyst/Getting_Started/Cloud_Monitoring_for_...

 

Wi-Fi 6:

  • Cisco Catalyst 9130 Series

  • Cisco Catalyst 9124 Series

  • Cisco Catalyst 9120 Series

  • Cisco Catalyst 9117 Series

  • Cisco Catalyst 9115 Series

  • Cisco Catalyst 9105 Series

 

Only in monitoring mode. 

 

View solution in original post

4 Replies 4
RaphaelL
Kind of a big deal
Kind of a big deal

Hi ,

 

Yes according to this document : https://documentation.meraki.com/Cloud_Monitoring_for_Catalyst/Getting_Started/Cloud_Monitoring_for_...

 

Wi-Fi 6:

  • Cisco Catalyst 9130 Series

  • Cisco Catalyst 9124 Series

  • Cisco Catalyst 9120 Series

  • Cisco Catalyst 9117 Series

  • Cisco Catalyst 9115 Series

  • Cisco Catalyst 9105 Series

 

Only in monitoring mode. 

 

Mayhhem
Conversationalist

Thank you for your quick reply 🙂

rhbirkelund
Kind of a big deal
Kind of a big deal

Do note that the Dashboard only supports these APs in cloud monitoring as @RaphaelL mentions. So you’ll still need a 9800 controller. You can not add these APs as any other Meraki AP and manage it from the Dashboard.

LinkedIn ::: https://blog.rhbirkelund.dk/

Like what you see? - Give a Kudo ## Did it answer your question? - Mark it as a Solution 🙂

All code examples are provided as is. Responsibility for Code execution lies solely your own.
thomasthomsen
Head in the Cloud

You write "migration" ... do you mean converting these APs to be running on the dashboard without a local WLC ?

Then no, that is only for the CW916x APs (where you can actually start the migration on the 9800 WLC).

For monitoring the 9800 WLC with the C9100 APs on the dashboard yes, that is supported as mentioned by others.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels