I just happened to test the wireless performance when I'm connected to a CW9166I with a very low signal, as my experience seemed fine, and it's actually pretty good:
If my answer solves your problem please click Accept as Solution so others can benefit from it.
Well with that low an SNR you probably got an MCS of 3. That should mean you got about a PHY rate of 144 Mbps since you are using an 80MHz channel (probably a 996 tone RU).
Well with that low an SNR you probably got an MCS of 3. That should mean you got about a PHY rate of 144 Mbps since you are using an 80MHz channel (probably a 996 tone RU).
Get notified when there are additional replies to this discussion.
