Forcing to connect to a specific AP

SOLVED
LudwigD
Getting noticed

Forcing to connect to a specific AP

My music streamer (Linn DSM) is connected to the network by WiFi.

In the house I have 3 AP (MR42E, MR30H, MR33). 

Often the Linn DSM, which is close to the MR42E, connects to a farther away AP with a weaker signal and hiccups in the music.

Is there a way to force it to connect to the MR42E ? 

 

Many thanks !

 

LD

 

1 ACCEPTED SOLUTION
Brash
Kind of a big deal
Kind of a big deal

You can't force a client to connect to a specific AP. It will always choose the best available based on signal strength etc.

The only way you can achieve the same outcome would be to place your music streamer on a different SSID and have that broadcast only from the AP's you want it to connect to.

 

That said, it more of a workaround than fixing the underlying issue. You might need to look into interference or tuning radio settings if it's connecting to a sub-optimal AP.

View solution in original post

1 REPLY 1
Brash
Kind of a big deal
Kind of a big deal

You can't force a client to connect to a specific AP. It will always choose the best available based on signal strength etc.

The only way you can achieve the same outcome would be to place your music streamer on a different SSID and have that broadcast only from the AP's you want it to connect to.

 

That said, it more of a workaround than fixing the underlying issue. You might need to look into interference or tuning radio settings if it's connecting to a sub-optimal AP.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels