cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Dual Band Sector Antenna MA-ANT-27 installation

New here

Dual Band Sector Antenna MA-ANT-27 installation

I can not believe there is no installation manual for connecting the MA-ANT-27 dual-band sector antenna's to a MR76.

 

The antenna has two cables labeled V & H. The AP has 4 ports. Two for 5 ghz and two for 2.4 ghz. So which cable goes to the 5 ghz and which goes to the2.4 ghz? I have two antennas for each device. THanks!

2 REPLIES 2
Kind of a big deal

Re: Dual Band Sector Antenna MA-ANT-27 installation

I don't know the answer, but I would expect you would connect one antenna to the two 2.4Ghz ports, and the other antenna to the two 5Ghz ports.

Head in the Cloud

Re: Dual Band Sector Antenna MA-ANT-27 installation

@PhilipDAth is correct in what he states. Connect one antenna to both the 2.4GHz ports and the other antenna to both the 5GHz ports. The H and V on the antenna are the polarisation of the elements in the antenna, ‘horizontal’ and ‘vertical’, you need one of each in each band for things to work as expected.

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.