switch 9300 vlan ID 1100,1200

[shlomoi]

Hi,

I'm trying to create a new vlans on the switch 9300L ,on the uplink trunk port 

vlan id 1100

vlan id 1200 

I get an error message that it is not possible to establish more than 1000 vlans .

I don't have 1000 vlans. I have about 30 vlans but some of them are over id 1000
is it possible ?

[RWelch]

Not sure if related or same scenario but sharing in the event it helps you:

C9300-M VLAN 1-1000 quirks 

Catalyst 9300/X/L-M Series Installation Guide has a NOTE about VLANs outside of 1-1000 for your consideration.

[shlomoi]

Hi, I tried as in the guide but it doesn't work

[Mloraditch]

The list must be less than a 1000 vlans total. Your list is well over a thousand

So 1-998,1100,1200 would be valid for an example or 1-500,600-700,1100-1200 and so on

[rhbirkelund]

Start by changing the allow list to something less than 1000 vlans in total, e.g. VLANs 1-200.

Save the config.

Then edit the ports again, and then add the VLANs to the list that you need.

[shlomoi · Accepted solution]

working!!!!
Thank you very much

[alemabrahao]

• 802.1Q VLAN and trunking support for up to 4,094 VLANs (1000 active VLANs with STP enabled)

https://documentation.meraki.com/MS/MS_Overview_and_Specifications/MS390_Datasheet#MS390_Licensing