sfp compatibility

[Mabouzid]

Dears ; 

i am asking is FINISAR FTLX8574D3BCV comptaile with Meraki MS425-32 switch or not 

as i have implementation & the link not bring up 

thanks 

[DarrenOC]

Hi @Mabouzid , I’ve used some weird and wonderful sfps in these boxes with minimal fuss.

Have you tried swapping the fibre heads round on your fibre patch lead?

[DarrenOC]

@Mabouzid - like this

https://m.youtube.com/watch?v=OKtF97VT8ts

[Mabouzid]

there is no laser led out from the switch port durring connect that sfp

[DarrenOC]

What’s connected to the remote end?  Do you have visibility at that end?  Any light coming out of the port at that end?  What fibre is running between both ends also?

[PhilipDAth]

Does the Meraki Dashboard show that the SFP+ is plugged in?

[IvanJukic]

Hi @Mabouzid ,

You can check if it is compatible using this guide. 

https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Small-Form_Factor_Plu...

Most of the time the issue is fibre strand need to be swaped or the Wavelength does match on either side. See below guide.

https://documentation.meraki.com/General_Administration/Tools_and_Troubleshooting/Basic_SFP_troubles...