meraki switch with 3rd party Access Point

yeowkm28
New here

meraki switch with 3rd party Access Point

i have a urgent requirement to setup additional wireless AP.

i need to consider 3rd party AP as it will take too long for the meraki AP to arrive at my door step for deployment.

ETA is usually 4-6 weeks upon confirmation of order.

 

can 3rd party wireless AP work with meraki poe switch MS220 ?

eg. AP from linksys

do I need power injector if the switch is not able to provide sufficent power?

i need poe because the location where i install the AP is high up the celing where there is no way to install power point to power the AP.

4 REPLIES 4
Navjot
Here to help

As long as the AP supports 802.3af/at, I don't see why the AP wouldn't work.

MilesMeraki
Head in the Cloud

As per the above answer. Any Vendor's gear will integrate/work with Meraki gear.  As long as the AP supports the appropriate POE standards there'll be no problem. 

Eliot F | Simplifying IT with Cloud Solutions
Found this helpful? Give me some Kudos! (click on the little up-arrow below)
JRobertBurgoyne
Comes here often

> ETA is usually 4-6 weeks upon confirmation of order.

What country are you in? 

 

The radios in the MR WAPs are really excellent. I've never had any problems, sad to see your situation. 

i have deployed 2 units of Linksys LAPN600 and 1 unit of LAPN1200 AP on the meraki switch.

in my old setup i have antslab authenticating clients connecting to meraki AP.

antslab will provide guests with access code to use the WIFI.

for the 3 new Linksys AP, i actually do not need guests to authenticate with the antslab gateway.

i just need a single SSID on the 3 linksys AP for guests to access WIFI Internet.

 

can this work ?

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels