connect meraki SFP module to Dell SFP

[MinhTu]

I have a question ,

 I want to connect my server with MS410 device by SFP optical port, Server I use DELL's SFP module and MS410 I use Meraki SFP Module. May I ask if they work?

[alemabrahao]

If both SFPs are of the same type (eg SFP-1GB-SX) and the Dell server recognizes the SFP it will work without any problems.

[MinhTu]

hi Sir,

example , 

SFP module meraki : MA-SFP-10GB-SR for switch MS410

SFP module Dell Server : SFP+ SR Optic for all SFP+ ports except high temp validation warning cards customer install for DELL SERVER R750xs 

it is godd?

[alemabrahao]

If both were the same speed (10GB) it should work.

[MinhTu]

okay, thank you sir

[cmr]

I'm sure you are aware, but just to note that the SFP+ transceivers will only work in the 2/4 ports at the right hand end of the switch.  The other ports are 1Gb only.

[MinhTu]

i still understand , so it mean only work on port 33-34 , and port 35-36 is not work, right?

[cmr]

@MinhTu All of those ports are 10Gb, it is just ports 1-32 in your case that are 1Gb.  On the smaller model 1-16 are 1Gb and 17,18 are 10Gb

[MinhTu]

I still not yet mean understand for you about  :""I'm sure you are aware, but just to note that the SFP+ transceivers will only work in the 2/4 ports at the right hand end of the switch.  The other ports are 1Gb only. ""

[cmr]

In the 16 port model only the last two ports (the ones on their own at the right hand side) at 10Gb, in the 32 port model the last 4 ports (again on their own at the right) are 10Gb

[MinhTu]

thank you, i understood