c9300 Onboardin

[Merak_tree]

I have replaced c9300 with same model in switch stack of 2 but the replaced switch still shows in the Meraki Dashboard, which is now showing dormant.  Do I need to remove old switch from the dashboard or simply run the Cloud Monitoring for Catalyst process and it will sort itself out.  I am new to this and trying to learn and all your help is greatly appreciated!  Thanks in advance!

[RWelch]

Getting started: Cisco Catalyst 9300 Management with Meraki Dashboard 

 

[PhilipDAth · Accepted solution]

I'm not sure.  But you will need to re-run the onboarding tool.  If you have an extra dormant switch in the dashboard afterwards, remove it.

Note that there is now a cloud native IOS-XE which is more reliable when it comes to interfacing with Meraki.

https://documentation.meraki.com/MS/Cloud-Native_IOS_XE

[Merak_tree]

I re-ran the onboarding tool at it did clean itself up.  I really appreciate guys for your responses!  Great community to be a part of!

[Inderdeep]

You got the answer from the legend of our community @PhilipDAth 

[CarolineS]

Thank you for the compliment about the community, @Merak_tree! I marked this thread as solved as Philip's answer seems to have fixed your issue. 

Cheers!