LAN-Network (VLAN10) -> MS250-Stack as a router -> MPLS-Network (VLAN5)
The MPLS-transfer-networks have a /29-mask (for the MPLS-VLAN-IP, the gateway and 2 more devices for redundancy).
The MS250 has a VLAN-IP for each network, but each MS250 also needs a Switch-IP to connect to the cloud. The default route points to the gateway of the /29-MPLS-subnet.
Now it seems as if the switches need their switch-IPs in the MPLS-network to connect to the cloud. When they are assigned a LAN-VLAN-IP they can not connect to the dashboard. That is a bit odd, because in the /29-MPLS-subnet the IPs shall be reserved for redundancy-devices.
Is there any possibility to configure the switches to connect to the dashboard without having their switch-IPs in the MPLS network ?