cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Switch Cloning of different sizes.

Highlighted
New here

Switch Cloning of different sizes.

Hi,

 

I need to swap out a MS220-24P with a MS220-48FP, can I use the clone tool to do this or is cloning of different size\models of switches not available? If not what would be the easiest way to trade these switches, I just need the additional density, the first 24 ports will be patched like for like.

I don't have the hardware available to lab this and I am fairly new to Meraki, I couldn't see any docs referring to this scenario just how to do it.

Thanks

 

 

1 REPLY 1
Highlighted
Kind of a big deal
Kind of a big deal

Re: Switch Cloning of different sizes.

depends on the ports u are using, 1-24 will be ok, but he sfp ports do not match for example port 25 will be copyed to port 25 instead of port 49.

because its a new switch, i would just claim it before installing and configure the ports as u wish.

 

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.