Specifying more than one DNS server in custom name servers

Solved
Silas
New here

Specifying more than one DNS server in custom name servers

I have a Meraki MS switch that it serving up DHCP for my wireless clients

 

However, I can't seem to specify more than one custom name server in the DHCP scope on the switch. If use the syntax

 

172.25.1.10 , 10.10.10.1

 

or

 

172.25.1.10,10.10.10.1

 

it doesn't take it.

 

How do I do this? (can't find it anywhere in the documentation)

1 Accepted Solution
WadeAlsup
A model citizen

If it's anything like setting Custom DNS on the security appliance, put one IP per line with a carriage return (press enter) between. 

 

172.25.1.10

10.10.10.1


Found this helpful? Give me some Kudos! (click on the little up-arrow below) and If my reply solved your issue, please mark it as a solution 🙂

View solution in original post

2 Replies 2
WadeAlsup
A model citizen

If it's anything like setting Custom DNS on the security appliance, put one IP per line with a carriage return (press enter) between. 

 

172.25.1.10

10.10.10.1


Found this helpful? Give me some Kudos! (click on the little up-arrow below) and If my reply solved your issue, please mark it as a solution 🙂

yep, that worked

 

thanks!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels