cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Specifying more than one DNS server in custom name servers

SOLVED
New here

Specifying more than one DNS server in custom name servers

I have a Meraki MS switch that it serving up DHCP for my wireless clients

 

However, I can't seem to specify more than one custom name server in the DHCP scope on the switch. If use the syntax

 

172.25.1.10 , 10.10.10.1

 

or

 

172.25.1.10,10.10.10.1

 

it doesn't take it.

 

How do I do this? (can't find it anywhere in the documentation)

1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
A model citizen

Re: Specifying more than one DNS server in custom name servers

If it's anything like setting Custom DNS on the security appliance, put one IP per line with a carriage return (press enter) between. 

 

172.25.1.10

10.10.10.1


Found this helpful? Give me some Kudos! (click on the little up-arrow below) and If my reply solved your issue, please mark it as a solution 🙂

View solution in original post

2 REPLIES 2
Highlighted
A model citizen

Re: Specifying more than one DNS server in custom name servers

If it's anything like setting Custom DNS on the security appliance, put one IP per line with a carriage return (press enter) between. 

 

172.25.1.10

10.10.10.1


Found this helpful? Give me some Kudos! (click on the little up-arrow below) and If my reply solved your issue, please mark it as a solution 🙂

View solution in original post

New here

Re: Specifying more than one DNS server in custom name servers

yep, that worked

 

thanks!

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.