Security for Interfaces for Meraki switches

[npnitin]

Hello Expert,

How I replicate below configuration (Cisco) in Meraki switches?

authentication control-direction in
authentication event server dead action reinitialize vlan '------'
authentication event server dead action authorize voice
authentication event server alive action reinitialize
authentication host-mode multi-auth
authentication port-control auto
authentication periodic
authentication timer reauthenticate 43200
authentication timer restart 3600
authentication violation restrict
mab
mls qos trust dscp
dot1x pae authenticator
dot1x timeout quiet-period 600
dot1x timeout server-timeout 40
dot1x timeout tx-period 2

[KarstenI]

You fing these settings under Switching -> Access Policies:

These Policies are later assigned to the interfaces.

https://documentation.meraki.com/MS/Access_Control/MS_Switch_Access_Policies_(802.1X)

[npnitin]

But its not covered all cmd.

[KarstenI]

These are different devices with different features. So, yes, there are differences.