I would like to prioritize all traffic on a certain VLAN.
Ideally all traffic from this VLAN should be identified as Voice so has priority for winning over the air contention.
Is there a guide to set this up?
Also a guide to allow only certain device types to connect to an SSID/VLAN.
Thanks in advance
You can set the CoS for a VLAN in "Switch/Switch Settings":
Some more info here:
To limit which devices end up in this VLAN there are several options. Most people will either use an Access Port with a specific VLAN (static assignment) or use 802.1X (dynamic assignment):
You can do this with 3d party RADIUS server or with Cisco ISE:
See also these links specific to voice deployment recommendations on wired and wireless networks with Meraki:
Check out this QoS quite for MR.
Also check out this VoIP brest practices guide.