Portal suggestion: View preferences

[AdrianR]

Can we have some kind of retained preferences on the portal layout.

ie rows per page. Most of our switches are 48Pt, usually I want to see all of them, not the first 30.

It would be better if the default view was 50 (or 54 in fact for SFP and stack ports) or just remember (or be able to set) a preference.

Same goes for selected columns etc etc.

[alemabrahao]

You can make a wish.

https://documentation.meraki.com/Platform_Management/Dashboard_Administration/Operate_and_Maintain/H...)

[PhilipDAth]

Can you post a screenshot showing the issue you are experiencing?

[GIdenJoe]

Wow you must have one huge campus if you have that many switches in 1 network.
If many of them are stacks you may be better off starting with the stack view though.

[Mloraditch]

I'm pretty sure OP is talking about the switch port view which does default to 30 ports and it would be really nice if a lot of the view preferences were referenced from the user profile vs the organization or network.

[GIdenJoe]

Woops, didn't catch that 😉

Well I don't have a big problem with the default 30 port view but I do understand that many switches are 48 port so a default of 50 or 75 would be better.

I do however have an issue with the maximum limitation for 200.  Because when you want to make a bulk change to over 200 ports you must remember to select them on all pages before pressing the edit button.  And yes that is after filtering ports based on a tag.