New MS120

Peterja21
New here

New MS120

I just received an MS120 -8LP.   When I try to "claim" my new switch, it says "Cannot claim real devices into demo organization"

 

Also, I want to connect it to my network, but when I connected port 1 to my network, it err-disabled the port.

Here's the port config:

 

switchport access vlan 5
switchport mode access
switchport voice vlan 6
priority-queue out
mls qos trust dscp
no cdp enable
spanning-tree portfast
spanning-tree bpduguard enable

3 REPLIES 3
ww
Kind of a big deal
Kind of a big deal

Re: New MS120

all ports of meraki are trunks by default.  so they are sending bpdu,s.

 you have to remove bpdu guard

 

not sure about the demo .org... you created a new organization? and are not in the demo?

PhilipDAth
Kind of a big deal

Re: New MS120

You should probably change port 1 of your network to being a trunk port, not an access port. You normally use trunk ports between switches.

BlakeRichardson
Kind of a big deal

Re: New MS120

@Peterja21 Re the demo organisation contact support and see whats going on. I cant find any information about a demo organisation unless you are actually trying to claim your device while i nthe trial dashboard which I highly doubt you are.

Meraki CMNO, Ruckus WISE, Sonicwall CSSA, Allied Telesis CASE & CAI
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.