Meraki and Linksys

[Raul_Umana]

I everyone, I have a Meraki-MS2250P switch and a linksys LGS352C and I want to connect them by a SFP fiber port, do you know if this is possible?

Many thanks in advance.

[Mloraditch · Accepted solution]

This should work as long you use compatible but matching (speed/duplex/media type) sfps at each end. I.e. if you use a Multi Mode MA-SFP-1GB-SX on the Meraki you need to use a multimode linksys compatible sfp on that end.

Here is the Meraki SFP list: 
https://documentation.meraki.com/General_Administration/Cross-Platform_Content/Small-Form_Factor_Plu...

I will say I've never not had a third party sfp work on my Merakis but officially the above link is the only supported hardware.

[cmr]

Also make sure the Linksys switch has its spanning tree set to STP mode and not MSTP or RSTP.

[Raul_Umana]

I appreciate your comments.

Best.