Meraki Switch Warmspare and LACP

Alex13529
Here to help

Meraki Switch Warmspare and LACP

Hi to all,

 

if I have configured a warm spare between two distribution switches like MS410, is it possible to configure also

link aggregation LACP on this switches for redundant Access switch connection.

 

Thanks in advance

 

Regards

 

Alex

1 Reply 1
DarrenOC
Kind of a big deal
Kind of a big deal

HI @Alex13529 - by setting up a Warm spare you're taking care of L3 redundancy.  I don't believe you'll be able to setup link aggregation using both the Active and Warm spare switches as they won't and can't be part of the same stack.

 

https://documentation.meraki.com/Architectures_and_Best_Practices/Cisco_Meraki_Best_Practice_Design/...

 

https://documentation.meraki.com/MS/Layer_3_Switching/MS_Warm_Spare_(VRRP)_Overview

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels