cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Meraki MS425-32 and MS225-48LP - SNMP support

SOLVED
Yuriy
Conversationalist

Meraki MS425-32 and MS225-48LP - SNMP support

Which SNMP MIBs are supported by Meraki MS425-32 and MS225-48LP switches? Do these switches support CISCO-CDP-MIB

 

Thanks in advance!

1 ACCEPTED SOLUTION

Accepted Solutions
Bruce
Head in the Cloud

Re: Meraki MS425-32 and MS225-48LP - SNMP support

The SNMP support on the Meraki devices is pretty basic, the API is often a much better way to go. I don’t know for sure about that particular MIB, but I doubt it is supported. There is some detail here around supported MIBs, https://documentation.meraki.com/General_Administration/Monitoring_and_Reporting/SNMP_Overview_and_C....

View solution in original post

2 REPLIES 2
Bruce
Head in the Cloud

Re: Meraki MS425-32 and MS225-48LP - SNMP support

The SNMP support on the Meraki devices is pretty basic, the API is often a much better way to go. I don’t know for sure about that particular MIB, but I doubt it is supported. There is some detail here around supported MIBs, https://documentation.meraki.com/General_Administration/Monitoring_and_Reporting/SNMP_Overview_and_C....

View solution in original post

Yuriy
Conversationalist

Re: Meraki MS425-32 and MS225-48LP - SNMP support

Thank you Bruce. I'm just curious why some MS switches support MIBs like CISCO-CDP-MIB and some does not. It is confusing especially when there is no any easily accessible information about it.

 

And - yes, API is a right way to go with Meraki 🙂

Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.