Solved! Go to solution.
You could run Jumbo Frames switch-wide and have all ports but the SAN ones have the standard MTU. Unfortunately, that‘s not possible with Meraki. 😞
@NolanHerring is right - Jumbo frames are enabled by default on Meraki switches.
With dynamic buffer management I don't see any point in changing it.
The problem is that the packets get fragmented at the firewall (ASA 5512-X) we got some issue with Microsoft Teams / Voice when fragmented
But that did not answer my question, is it possible for Meraki Support Engineer to change MTU by Port and VLAN basis
No.