Do you know if Cable Cisco QSFP-4SFP10G-CU5M work with Cisco Meraki Switch MS450?
https://www.andovercg.com/datasheets/cisco-40GBASE-Qsfp-modules.pdf
Thanks
Best Regards
Juan
No. While generally Meraki is forgiving in non-official support this is pushing it too far. Pretty sure the dashboard can't handle splitting up the 40G interfaces into 4 10G interfaces. Here are the officially supported SFPs:
Correct the 4x10G breakout cables are not supported on MS.
What if it was connecting to a Stack of 4 with Link Aggregation? Then it would technically be one interface to one interface? Has anyone tried it?
Has anyone tried this? Does I work?
@Gleep52 it cannot work as you only have one port number for the QSFP+ ports. On other switches that support breakout cables the QSFP+ ports are numbered like 37 and 41 so that when you use a breakout cable, 38, 39 and 40 appear.