cancel
Showing results for 
Search instead for 
Did you mean: 

MS425 reset stack member

New here

MS425 reset stack member

Hello,

I have a stack of 8*MS425 access switchs connected to 2*ms250 core switch with port-channel ( through member stack 1 and 8 ) .

My management and native vlan is 120.

when i tried to reset a swich member without a uplink port ( member 2 to 7 ) . my switch can't have a IP adresse or connect to meraki dashboard.

I forced localy the management vlan on DHCP vlan 120. the switch received an IP adress, but can't connect to meraki dashboard.

Can you help please ?

Sans titre.png

2 REPLIES
Kind of a big deal

Re: MS425 reset stack member

Have you got the stack ports configured in a ring?  So port 1 on one switch goes to port 2 on the next?

Kind of a big deal

Re: MS425 reset stack member

I've had much better luck with MS devices when the management VLAN is not the native VLAN on the uplink interface(s). MS devices like to tag their management traffic all the time which can cause issues when the native VLAN is the management VLAN. 

MRCUR | CMNO #12
Labels