I've got a MS425-16 as a Core, connected via a trunk port to a stack of three MS225-FP's. All are running v9.32
VLAN 1, VLAN,2 VLAN3 are setup on the Core. No VLAN's on the stack.
From VLAN 1 I can successfully ping 8.8.8.8 from the tools menu.
I try the same with VLAN 2 and 3 but can't ping 8.8.8.8.
However, if I leave a ping running from VLAN 1 to 8.8.8.8 and then try again from VLAN 2 and 3 I get a response !
If I run MTR against an address in VLAN 1 it confirms routing is taking place on the Core.
If I do the same on VLAN 2 and 3 it reports that it's jumping to the firewall ! Why ? All VLANS exist on the Core so surely the routing should be taking place here.
The default route is to the non-Meraki firewall. I've confirmed all necessary routes exist on the firewall.
I've read others having issues with v9.32. Is this a symptom ? This is driving me mad as I can't see anything wrong in my setup.