MS350-48FP Combined Power

Troyee
Getting noticed

MS350-48FP Combined Power

Good day Everyone,

 

I have inserted my 1025WAC redundant power supply for my MS350-48FP. May i seek your help on how i can combine my power for PoE?

 

Will appreciate your response.

 

Thank you.

7 Replies 7
BrechtSchamp
Kind of a big deal

On the Switch > Switch Settings page:

2019-05-08 11_20_24-Switch settings - Meraki Dashboard.png

Hi Brecht,

 

Upon plugging the redundant power supply i found nothing on the Switch Settings. I've attached screenshot for reference.

 

Thank you.Power Supply.JPG

 

Switch Settings.JPG

 

Thanks.

BrechtSchamp
Kind of a big deal

You need to scroll down on that second screenshot.

 

There's Quality of Service, MTU configuration, Multicast settings and then Power supply settings normally.

Hi Brecht,

 

Still, there was no power supply setting for me.

Switch Settings 2.JPG

 

BrechtSchamp
Kind of a big deal

What firmware are your switches running? If not the most recent, could you try upgrading?

I'm currently using the updated version which is 10.45

 

 

BrechtSchamp
Kind of a big deal

I think you may have hit a bug. I see the same in one of my networks. The curious thing is that it either shows the Storm control settings or the Power settings, but not both.

 

Maybe a coding error in the dynamic building of the page. Best to open a helpdesk case.

Get notified when there are additional replies to this discussion.