MS350 - 355 stacking issue

mariuszb
Conversationalist

MS350 - 355 stacking issue

Hi 

 

[None of my devices have been connected or plugged in yet if that will make a difference]

 

I am trying to set up a stack of 3 switches... 

I have a stack of two MS350-48FP already created

When I try to add a switch to a stack as a member

MS355-48X2

I get This switch is a different model than other switches in the stack

what can I do in this case and what are my other options if anything 

 

thanks 

2 Replies 2
jdsilva
Kind of a big deal

As the error message says, you cannot stack different models of switches with each other (the exception being 210/225).

 

The only thing you can do is connect it via Ethernet as a standalone switch.

 

https://documentation.meraki.com/MS/Stacking/Switch_Stacks#Stacking_Availability

PhilipDAth
Kind of a big deal
Kind of a big deal

Other options I can think oif is to return it and get 2 x MS355-24X2 and start a new higher perofrmance stack, or return it and get another switch the same as your existing stack.

 

I guess you could also get another MS355-48X2 and start a new higher performance stack.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels