MS225/250: Stacking with QSFP Modules

SOLVED
AE
Conversationalist

MS225/250: Stacking with QSFP Modules

Hi community,

 

is it possible to use QSFP modules (e.g. MA-QSFP-40G-LR4) for stacking via fiber optics with the MS225 or MS250, or is this only possible with the 40G TwinAx cables?

 

Best regards,

Andreas

1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

4 REPLIES 4
BrechtSchamp
Kind of a big deal

There's no documented support for that. To be tested if in practice it works, but I doubt it.

DarrenOC
Kind of a big deal
Kind of a big deal

as previously mentioned, its not documented so not supported.  I would stick to the MA-CBL-40G cables.

Darren OConnor | doconnor@resalire.co.uk
https://www.linkedin.com/in/darrenoconnor/

I'm not an employee of Cisco/Meraki. My posts are based on Meraki best practice and what has worked for me in the field.
PhilipDAth
Kind of a big deal
Kind of a big deal

It wont work.

AE
Conversationalist

Thanks for your replies!

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels