Has anyone run into a problem like this with the new MS130R-8P switches?
No PoE provided to an EnGenius ROAM Base Unit, which is 802.3 af compliant. On the same port, I plug in an Avaya J179 IP phone (also 802.3 af compliant) and PoE is provided.
Here's the interesting part. I take that same EnGenius ROAM Base Unit and plug it into an MS355-48X2 and PoE works.
Meraki support says that the MS130R-8P provides PoE over 2 pairs (which is BT), and that THAT is the end of it. If that is the case, why would the Avaya J179 work on the same switchport on the MS130R-8P that fails to provide PoE to the EnGenius?
Any ideas, insights, or suggestions would be appreciated.