MS120-8FP Query

Solved
Takis_Samanis
Here to help

MS120-8FP Query

Hello Experts,

 

I see in the datasheet that the switch supports LACP. Can the feature work in both uplinks and downlinks?

My problem is that if link aggregation only works on the downlinks we will have a bottleneck on the unbundled uplinks.

 

Does this switch support multigig? To be honest I've not seen it anywhere in the documentation

 

Thanks in advance

 

1 Accepted Solution
Ryan_Miles
Meraki Employee
Meraki Employee

LACP is supported on any of the switch ports. And, no the MS1xx series doesn't have mgig. To get mgig you need to be in the 3xx series.

 

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.

View solution in original post

3 Replies 3
Ryan_Miles
Meraki Employee
Meraki Employee

LACP is supported on any of the switch ports. And, no the MS1xx series doesn't have mgig. To get mgig you need to be in the 3xx series.

 

Ryan

If you found this post helpful, please give it Kudos. If my answer solves your problem please click Accept as Solution so others can benefit from it.
BlakeRichardson
Kind of a big deal
Kind of a big deal

@Takis_Samanis The 1xx series are entry level switches so not all features are available on them. The 2xx series has a few more features and as mentioned the 3xx series have multigig ports. 

If you found this post helpful, please give it Kudos. If my answer solves your problem, please click Accept as Solution so others can benefit from it.
Takis_Samanis
Here to help

Thanks guys 😀

Get notified when there are additional replies to this discussion.