MAC whitelisting for an Access Point

[Darian]

Is it possible to setup the mac allow list to have the MAC address for an MR33 but still be allowed to have wireless clients connect to it and get intranet and internet access? 

Our main issue here is for it to work correctly it would seem we have to have the port set to trunk and allow all VLAN's that have an SSID tied to it. The access point is plugged into a normal wall jack due to our renters not allowing us to run new cables so we don't want people unplugging it and using something else when the ports are wide open and allowed access to everything. 

[ww]

Maybe its better to use secureconnect

https://documentation.meraki.com/MS/Access_Control/SecureConnect

Configure it that when no mr is connected its using a unused vlan that have no access

[Darian]

That looks promising, but looks like we need beta firmware to do it, do you know if there is any other way to do this until it's come out fully? It won't let me enable the Beta in network wide settings says it's not compatible.