MAC whitelisting for an Access Point

Darian
Here to help

MAC whitelisting for an Access Point

Is it possible to setup the mac allow list to have the MAC address for an MR33 but still be allowed to have wireless clients connect to it and get intranet and internet access? 

 

Our main issue here is for it to work correctly it would seem we have to have the port set to trunk and allow all VLAN's that have an SSID tied to it. The access point is plugged into a normal wall jack due to our renters not allowing us to run new cables so we don't want people unplugging it and using something else when the ports are wide open and allowed access to everything. 

2 Replies 2
ww
Kind of a big deal
Kind of a big deal

Maybe its better to use secureconnect

 

https://documentation.meraki.com/MS/Access_Control/SecureConnect

 

Configure it that when no mr is connected its using a unused vlan that have no access

Darian
Here to help

That looks promising, but looks like we need beta firmware to do it, do you know if there is any other way to do this until it's come out fully? It won't let me enable the Beta in network wide settings says it's not compatible. 

 

Darian_0-1621445601987.png

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels