Limit bandwidth on port basis

[Orlando92]

We have a customer that wants to hardwire all guest rooms directly to the switch.   I know we can do PORT ISOLATION on the MS appliance, however the client wants to know if they can limit the bandwidth on a per port basis – any ideas?

[BlakeRichardson · Accepted solution]

Not on a switch no. If you are using an MX as the router then you can do it through that. 

[Inderdeep]

@Orlando92 : switch ports are not intended to limit on the bandwidth. It is always on the WAN device which is MX as rightly said by @BlakeRichardson 

[Orlando92]

Thank you where can I find documentation on this? is it just traffic shaping? 

[Make_IT_Simple]

Hi @Orlando92 Yes, it is under traffic shaping:

https://documentation.meraki.com/MX/Firewall_and_Traffic_Shaping/SD-WAN_and_Traffic_Shaping#Global_b...

You can do the same thing if you have Meraki APs under Wireless > Firewall & Traffic Shaping,:

https://documentation.meraki.com/MR/Firewall_and_Traffic_Shaping/Traffic_and_Bandwidth_Shaping