LAN to LAN MS250

[nst1]

I have an L2 MS250 switch, this equipment will be directly connected to a Cisco Router.

VLAN 15 traffic and LAN to LAN

VLAN 110 server VLAN 130 user

Note: LAN to LAN does not have internet access.

How can I configure LAN to LAN on the switch ???

I will not have problems if I have LAN to LAN in one port and in another Internet service ???

[ww]

lan to lan, what is this? what are you trying to build?

you just want a l2 vlan on the switch?  then you only need to add that vlan on the ports of your switch

[nst1]

sorry is L3 my SM250

in my MS the VLANs are configured, then if a user wants to consult a service that is in the LAN to LAN this must be directed by the VLAN 15

How can I do that route?

[ww]

if you need to route to a unknow subnet for your switch? make a static route to the ip of the router that you connect on vlan 15? .  subnet/xx  <upstream router ip in vlan 15>

or a default route to the  <upstream router ip in vlan 15>

[nst1]

That's right, the route you mentioned and I have defined it as a transit VLAN

that communicates the Meraki with the Router

[PhilipDAth]

Perhaps check out this switching example.

https://documentation.meraki.com/MS/Layer_3_Switching/Layer_3_Switch_Example

[nst1]

I'm looking for "Initialize layer 3" under the Status section but I do not find out what the route is ???