Inter-vlan routing

pascaldu34
Comes here often

Inter-vlan routing

Hello, I have a problem with my meraki
I have a pc in vlan 1 in 192.1681.1 gateway .254 (meraki) and I would like to print on a printer which is in vlan 10 in 192.168.10.1 gateway.10.254 (meraki)

Impossible to ping the ip of the printer which is in the other vlan and therefore print despite the inter vlan routing being activated?

 

Do you have an idea ?
thank you
 
 
 
 
6 REPLIES 6
Inderdeep
Kind of a big deal

@pascaldu34 : Check this below link

https://community.meraki.com/t5/Security-SD-WAN/Inter-VLAN-Routing/m-p/85170

https://community.spiceworks.com/topic/1957461-can-t-communicate-between-vlans 

Regards
Inderdeep Singh
www.thenetworkdna.com ( Awarded by Cisco IT Blogs award 2020)
PhilipDAth
Kind of a big deal

Make sure both the PC and the printer have the correct subnet mask which is most likely to be 255.255.255.0.

 

You could also check out the layer 3 guide for MS.

https://documentation.meraki.com/MS/Layer_3_Switching/MS_Layer_3_Switching_and_Routing 

hello , yes the subnet is correct...

GIdenJoe
Kind of a big deal

And check both devices have correct gateway and are showing the correct MAC address of the gateway so they can actually reach it.

HELLO, 

from my pc, I ping the gateway of my network vl1 and that of the network vl10 but impossible to ping the ip of the printer, my mask is indeed in 255.255.255.0
pascaldu34
Comes here often

it s a meraki MX

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels