Dynamic ARP Inspection on MS 120 Does not working

SOLVED
Kave
Getting noticed

Dynamic ARP Inspection on MS 120 Does not working

Dynamic ARP Inspection on MS 120 Does not working

 

Capture33.PNG

kav noroozi
1 ACCEPTED SOLUTION
PhilipDAth
Kind of a big deal
Kind of a big deal

Correct.   It is only available on the layer three switches. 

View solution in original post

5 REPLIES 5
PhilipDAth
Kind of a big deal
Kind of a big deal

Correct.   It is only available on the layer three switches. 

timeshimanshu
Getting noticed

if you are running MS120 then your MX would be probably working as L3 Gateway. Check on your MX ARP table.

This feature is unsupported by MS120

Thank you,   

 

But I could not find any Dynamic ARP Inspection on MX series, It is just L3 switches capability I think. 🙂

kav noroozi
SoCalRacer
Kind of a big deal

Not supported on the MS120 model.

 

Supported Models are listed in this document and more info regarding the feature.

 

https://documentation.meraki.com/MS/Other_Topics/Dynamic_ARP_Inspection

Re: Dynamic ARP Inspection on MS 120 Does not working
I could not find any Dynamic ARP Inspection on MX series, It is just L3 switches capability I think. Smiley Happy
kav noroozi
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels