cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Dynamic ARP Inspection on MS 120 Does not working

SOLVED
Highlighted
Getting noticed

Dynamic ARP Inspection on MS 120 Does not working

Dynamic ARP Inspection on MS 120 Does not working

 

Capture33.PNG

kav noroozi
1 ACCEPTED SOLUTION

Accepted Solutions
Highlighted
Kind of a big deal

Re: Dynamic ARP Inspection on MS 120 Does not working

Correct.   It is only available on the layer three switches. 

View solution in original post

5 REPLIES 5
Highlighted
Kind of a big deal

Re: Dynamic ARP Inspection on MS 120 Does not working

Correct.   It is only available on the layer three switches. 

View solution in original post

Highlighted
Getting noticed

Re: Dynamic ARP Inspection on MS 120 Does not working

if you are running MS120 then your MX would be probably working as L3 Gateway. Check on your MX ARP table.

This feature is unsupported by MS120

Highlighted
Kind of a big deal

Re: Dynamic ARP Inspection on MS 120 Does not working

Not supported on the MS120 model.

 

Supported Models are listed in this document and more info regarding the feature.

 

https://documentation.meraki.com/MS/Other_Topics/Dynamic_ARP_Inspection

Highlighted
Getting noticed

Re: Dynamic ARP Inspection on MS 120 Does not working

Thank you,   

 

But I could not find any Dynamic ARP Inspection on MX series, It is just L3 switches capability I think. 🙂

kav noroozi
Highlighted
Getting noticed

Re: Dynamic ARP Inspection on MS 120 Does not working

Re: Dynamic ARP Inspection on MS 120 Does not working
I could not find any Dynamic ARP Inspection on MX series, It is just L3 switches capability I think. Smiley Happy
kav noroozi
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.