Do Meraki switches fallback from Static IP to DHCP

Henk1961
Here to help

Do Meraki switches fallback from Static IP to DHCP

Hello,

 

If a Meraki switch has a static IP address does it fallback to DHCP if it cannot reach the gateway?

I understand that MX and MR devices do, but not sure if Switches also do this.

3 Replies 3
PhilipDAth
Kind of a big deal
Kind of a big deal

Yes, but it can take some time (up to 2 hours).

GIdenJoe
Kind of a big deal
Kind of a big deal

If their static IP is configured in a specific VLAN and their uplink VLAN configuration does not match that VLAN it will take a DHCP address from the VLAN it is receiving.

For example: your static IP is in VLAN 20 and you have set VLAN 20 as native in your uplink port, but the uplink switch/other appliance has a different VLAN as native, then you will receive DHCP from that VLAN instead.

yes they do, to get it quick just restart. Otherwise you have to wait.

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels