Delete or edit interface Sw

nst1
Building a reputation

Delete or edit interface Sw

 

I have this static route and this transit VLAN

 

I want to delete tje transit VLAN and it does not allow it.

 

 

image.png

 

neither does it allow me to edit it

 

Captura.PNG

neither does it allow me to delete it, route static

 

Captura.PNG

 

 

3 Replies 3
PhilipDAth
Kind of a big deal
Kind of a big deal

Have you tried delete the static route first?

nst1
Building a reputation

yes

GiacomoS
Meraki Employee
Meraki Employee

Hey @nst1,

 

I suppose the question actually becomes:

Why are you using the switch in L3 mode if you don't want it to route any traffic? 🙂 


If you configure a L3 interface, you will always need to have a route to reach out to the internet and therefore we will make sure that you do not delete it as it would cause loss of service to the device. 

 

Solution here, I think, would be to either move back to L2 if L3 is not required or create an alternative default route.

 

Hope this helps!

 

G

Please keep in mind that what I post here is my personal knowledge and opinion. Don't take anything I say for the Holy Grail, but try and see!
Appreciate who helps and be respectful of every opinion and every solution offered.
Share the love, especially the Meraki one!
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels