Current clients on MS390 (14.33.1) switch is very high

Solved
AzureInnocence
Here to help

Current clients on MS390 (14.33.1) switch is very high

Hello there,

 

I'm noticing that the Current clients count on the Switch overview page is showing a very high count that ranges from 700 to 1500.

AzureInnocence_0-1679960685875.png

There is a Primary MX with a secondary MX  which connects to two MS switches in a stack. There are only 10 MRs.

 

The client count on the Network-wide -> Monitor -> Clients is normally around just 80+

 

I am not sure why the Current clients count would be so high.

1 Accepted Solution
AzureInnocence
Here to help

Hello!

 

Seems updating to MS 15.21.1 has solved this issue now.

AzureInnocence_0-1680505472187.png

 

 

View solution in original post

2 Replies 2
alemabrahao
Kind of a big deal
Kind of a big deal

I'm pretty sure that it will include all client discovered on the network including wireless clients.

 

Have you checked with Meraki support?

I am not a Cisco Meraki employee. My suggestions are based on documentation of Meraki best practices and day-to-day experience.

Please, if this post was useful, leave your kudos and mark it as solved.
AzureInnocence
Here to help

Hello!

 

Seems updating to MS 15.21.1 has solved this issue now.

AzureInnocence_0-1680505472187.png

 

 

Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels