Connecting a MS220-8P switch to a MS120-8FP switch to establish network connectivity will this work?

Solved
phelimmc
Here to help

Connecting a MS220-8P switch to a MS120-8FP switch to establish network connectivity will this work?

Can anyone advise please the MS120-8FP switch we use is networked and live. Is it possible that we can connect a MS220-8P switch to it by network cable to establish network connectivity on it also. We have set both ports on both switches to the same native VLAN, allowed VLANs set to all and disabled POE on both ports that we will connect the network cable on both switches. We plan to connect the network switches then by network cable so the MS220-8P is networked? is this possible between these two switch models or will it only work on a like for like model?

Thanks

1 Accepted Solution
Ryan_Miles
Meraki Employee
Meraki Employee

Yes, you can connect any two switches together with standard front side port. No problems here.

Ryan / Meraki SE

If you found this post helpful, please give it Kudos. If my answer solved your problem click Accept as Solution so others can benefit from it.

View solution in original post

1 Reply 1
Ryan_Miles
Meraki Employee
Meraki Employee

Yes, you can connect any two switches together with standard front side port. No problems here.

Ryan / Meraki SE

If you found this post helpful, please give it Kudos. If my answer solved your problem click Accept as Solution so others can benefit from it.
Get notified when there are additional replies to this discussion.
Welcome to the Meraki Community!
To start contributing, simply sign in with your Cisco account. If you don't yet have a Cisco account, you can sign up.
Labels